Purchase Your Fire Extinguisher Servicing Online Now - Available Across The Country
We Recommend
Bestseller
Code: FPPC001/149
from
£56.87
INC VAT
Code: FPPC001/149
Envirograf HW/CRC a chlorinated rubber top coat for use over intumescent coating in areas of high humidity.
The clear top coat is a single pack coating for use in difficult environments than offers excellent protection, chemical and water resistance. This product is an ideal coating for concrete and steel used in difficult conditions such as marine and chemical environments.
Two coats are recommended on new concrete. If you require further information when choosing the correct intumescent products, email [email protected]
Please Note:
This product is both non returnable and non refundable.
If you require a certificate for the item your are fire-proofing, you will need to apply a prime AND a top coat. A top coat alone will not be sufficient for a certificate to be issued.
Envirograf HW/CRC Clear Top Coat | ||
Heavy duty protection | For use in difficult environments, i.e. marine and chemical | Chemical & water resistance |
Gloss finish | ||
Envirograf HW/CRC Clear Top Coat | |||
Colour | Clear | Volume Solids | 40 - 50% |
Airless Spray | Tip size 0.113 - 0.021 inch Fluid Pressure 150 - 225 bar | Touch Dry | 30 - 60 mins dependent on drying conditions |
Conventional Spray | Thin as required. More than one coat will be required | Through Dry | 8 - 16 hours dependant on temperature |
Brush & Roller | Suitable provided correct film thickness is achieved | Overcoating | After 8 hours |
Dry Film | 60 microns dft airless per coat | Full Cure | 5 - 7 days |
Coverage | 8m² per litre | Application | Air & object temperature between 5°C - 30°C |
Thinner | Chlorinated rubber thinners | Conditions | Relative humidity below 85% Substrate temp min 3°C above dew point |
Flash. Point | 22°C - 32°C | ||
Envirograf HW/CRC a chlorinated rubber top coat for use over intumescent coating in areas of high humidity.
The clear top coat is a single pack coating for use in difficult environments than offers excellent protection, chemical and water resistance. This product is an ideal coating for concrete and steel used in difficult conditions such as marine and chemical environments.
Two coats are recommended on new concrete. If you require further information when choosing the correct intumescent products, email [email protected]
Please Note:
This product is both non returnable and non refundable.
If you require a certificate for the item your are fire-proofing, you will need to apply a prime AND a top coat. A top coat alone will not be sufficient for a certificate to be issued.
Envirograf HW/CRC Clear Top Coat | ||
Heavy duty protection | For use in difficult environments, i.e. marine and chemical | Chemical & water resistance |
Gloss finish | ||
Envirograf HW/CRC Clear Top Coat | |||
Colour | Clear | Volume Solids | 40 - 50% |
Airless Spray | Tip size 0.113 - 0.021 inch Fluid Pressure 150 - 225 bar | Touch Dry | 30 - 60 mins dependent on drying conditions |
Conventional Spray | Thin as required. More than one coat will be required | Through Dry | 8 - 16 hours dependant on temperature |
Brush & Roller | Suitable provided correct film thickness is achieved | Overcoating | After 8 hours |
Dry Film | 60 microns dft airless per coat | Full Cure | 5 - 7 days |
Coverage | 8m² per litre | Application | Air & object temperature between 5°C - 30°C |
Thinner | Chlorinated rubber thinners | Conditions | Relative humidity below 85% Substrate temp min 3°C above dew point |
Flash. Point | 22°C - 32°C | ||
£20.89
ex vat
£33.29
ex vat
£31.49
ex vat
£44.39
ex vat
£19.09
ex vat
£37.19
ex vat
Fire Protection Shop specialise in the supply of high-quality fire extinguishers. There are many different classifications of fire and so our products include a variety of different extinguisher types. For example, we offer water or foam fire extinguishers for solid combustibles and carbon dioxide fire extinguishers for flammable liquid or electrical fires. Each extinguishing agent comes with its benefits. Typically, water extinguishers are cheaper, produce a cooling effect and prevent reignition once the fire has been extinguished. Carbon dioxide extinguishers are clean agents, they leave no residue, are suitable for electrical fires and are often used on liquid fires which include petrol, oil or other solvents.
In addition to our extinguishers, we offer a range of fire safety products to both domestic and commercial premises. This includes the supply of fire blankets, extinguisher stands, smoke alarms, first aid kits and much more. Our entire range is sourced from reputable brand manufacturers at competitive prices. Also, all of our products carry a full warranty and guarantee and are supplied with relevant fixings where applicable.
So, for fire extinguishers, alarms and all your other fire safety needs, trust Fire Protection Shop to give you the quality, expertise and service you require.
We use cookies to enhance your site experience. Choose your preferences below.